Graco affix backless booster manual

Graco affix backless booster manual
.
.
Download / Read Online Graco affix backless booster manual
.
.
.

.
OR DEATH IN A SUDDEN STOP OR CRASH. Top element. Do not install or use this car seat until you read and understand the instructions in this manual. FAILURE TO PROPERLY USE THIS CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SUDDEN STOP OR CRASH. Attaching Booster to Vehicle Seat . Securing your Child in Vehicle . Register Your Booster Seat Please fill in the above information. The model number and date of manufacture can be found on a label underneath your booster seat. Fill out the prepaid registration postcard attached to the seat cover and mail it today. STOP using this booster seat and throw it away 10 years after the date of manufacture. Parts List Adult assembly required. Armrests On certain models Lower back support Head support Seat pad Seat pad. Warnings to Parents and Other Users NEVER PLACE THIS BOOSTER SEAT IN A VEHICLE SEATING LOCATION THAT HAS AN AIR BAG. If an air bag inflates, it can hit the child and booster seat with great force and cause serious injury or death to your child. NO BOOSTER SEAT CAN GUARANTEE PROTECTION FROM INJURY. HOWEVER, PROPER USE OF THIS BOOSTER SEAT REDUCES THE RISK OF SERIOUS INJURY OR DEATH TO YOUR CHILD. Remove it or make sure that it is securely belted in the vehicle. DO NOT MODIFY YOUR BOOSTER SEAT or use any accessories or parts supplied by other manufacturers. NEVER USE BOOSTER SEAT IF IT HAS DAMAGED OR MISSING PARTS. DO NOT use a cut, frayed or damaged vehicle seat belt. THE BOOSTER SEAT CAN BECOME VERY HOT IF LEFT IN THE SUN. Weight and Height Limits FAILURE TO USE booster seat in a manner risk of serious injury or death. Children are safer when properly restrained in rear vehicle seating positions. Whenever possible secure the Graco booster seat in the center position of the seat directly behind the front seats. However, this position is often equipped with a lap belt only and cannot be used. Vehicle Seat Belt Requirements A FEW SEAT BELT SYSTEMS ARE NOT SAFE TO USE WITH THE BOOSTER SEAT. NOT safe to use look very much like seat belts that are safe to use. UNSAFE Vehicle Seat Belt Systems DO NOT USE ANY OF THE FOLLOWING VEHICLE BELT SYSTEMS. Shoulder Belt NEVER use vehicle belts that are attached to the door in any way or. Assembling the Booster Seat Step 1. CHECK to make sure armrests are securely attached by pulling up on them Step 2. Remove cupholder from compartment in bottom of base . Wrap seat pad around front of base attach with elastic straps as shown. Your Graco booster seat is now ready to use. FOR MODELS with a back support continue. On certain models, your lower back support pad may not be attached to the back support. Place lower back support pad around edges of support as shown. Then fasten lower elastic strap to the metal hook on the other side of the seat pad. CHECK to make sure two pieces are securely snapped together by pulling on them. Attach elastic strap to metal hook on other side of seat pad as shown . If your elastic strap is already attached you can skip to Step 8. Flip seat over and insert the fabric from the head support underneath the fabric on the lower back support as shown To make insertion of fabric easier, slide the upper and button. Make sure that no part of the seat covering interferes when attaching backrest to the base. Once backrest is securely attached to the base, push backrest up as shown. Using your Graco Booster Seat FAILURE TO PROPERLY SECURE YOUR CHILD AND THE BOOSTER SEAT IN YOUR VEHICLE INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Vehicle belts MUST lie flat against child and MUST not be twisted. DO NOT use shoulder belt loose or positioned DO NOT position vehicle belt over top of the armrests . It must pass underneath the armrests. Make sure vehicle belt is NOT twisted. Vehicle seat headrest must not interfere with booster seat head support. The front of booster seat MUST NOT hang over front of vehicle seat The back of the booster seat MUST fit tight against the vehicle seat back as shown. Booster Seat Positions Your booster seat has two positions as shown. Upright Reclined The back of the booster seat MUST fit tight against the vehicle seat back as shown in either the first or second position. DO NOT USE booster seat beyond reclined position. Attaching Booster to Vehicle Seat WARNING! Use only shoulder belt system when restraining the child in this booster seat. AFFIX connectors are ONLY to secure the booster seat to the vehicle seat. Push button on front of seat and pull connectors out from back of booster 2. Attach connectors to vehicle lower anchors Pull firmly on connectors be sure they are attached. NEVER put two connectors on one vehicle anchor. Tighten connectors, by pushing on booster and pulling straps on front of booster 4. To remove booster, push release button up on front of booster and pull slightly away from seat. Securing Your Child in Vehicle 1. Have your child sit in booster seat with their back flat against back of booster sea filexlib.
.
Graco affix backless booster instruction manual
Graco affix backless booster user guide
Graco affix backless booster كتيب
Graco affix backless booster service guide
Graco affix backless booster prirucnik